Joint Protectors

Joint Protectors

When conductor midspan joints are compressed during the process of pulling conductors over the towers they need to be covered with an enclosure which prevents them from bending while travelling through the Pulley Blocks.

 

designed to protect mid-span joints while being pulled over Pulley-Blocks during stringing

Please specify on the order:

CS = length and diameter of compression sleeve

D = conductor diameter

 

 

part no. ZECK GmbH
part no.
OD
mm
min. pulley
groove width
mm
max. CS
ø
CS length after
compression max
mm
TL*
mm
BL
kN
weight
Kg
JOP-01-001 77-0450 60.30 68 49.22 698 1038 2-5 6.75
JOP-01-002 77-0452 73 80 58.98 829 1169 max 6.5 11.05

 

OD - outside diameter

CS - compression sleeve

O.D. CS - outside diameter of compression sleeve

TL - total length including rubber insert

* total length of joint protectors can be made up to order.